In the process of using the planetary wpks40 reducer, we will inevitably encounter some problems more or less. Among all the large and small problems, the failure of wpks40 reducer to start normally is almost a more common phenomenon. In fact, there is no need to worry about this situation. We can restore it to normal use by doing these three things well.
01: when wpks40 reducer cannot be started normally, check whether the power supply of AC relay and thermal protection relay is normal. The maintenance method is to check the problems at the power supply and restore the normal power supply.
02: check whether the winding coil of AC relay is damaged or whether the magnet is rusted. The maintenance method is to remove the rust of the magnet during maintenance. If the coil is damaged, it shall be replaced in time.
03: later, check whether the winding of AC relay is short circuited. If there is no open circuit, check whether the wiring contact of thermal protection relay is connected or damaged. The maintenance method is to repair the AC relay so that the contact points receive well.
In my opinion, the failure to start the wpks40 reducer normally without damage is simply due to these three points. Therefore, when the wpks40 reducer fails to start normally and ensure that the wpks40 reducer is not damaged, there is no need to spend expensive maintenance fees and assign special personnel to repair. You can carry out maintenance and inspection according to the above three points.
Friends who have just come into contact with the planetary wpks40 reducer generally know little about the wpks40 reducer, so it is inevitable to wonder what is the difference between the primary planetary wpks40 reducer and the secondary planetary wpks40 reducer, whether the primary reducer is more powerful or the secondary reducer is more powerful, So today, I will introduce in detail the difference between the primary reducer and the secondary reducer.