What is the reason why turbine wpds155 reducer is easy to wear? Today, Xiaobian will summarize the reasons for this. Worm gear wpds155 reducer generally adopts non-ferrous metal tin bronze as worm gear, and worm adopts hard steel, which can improve efficiency. Some are easy to wear out during operation. What are the reasons for this? In fact, there are reasons for mechanical assembly, but also the improper use of lubricants.
Specifically, there are the following reasons:
01. Due to the particularity of the worm gear structure, the worm gear wpds155 reducer is almost completely in sliding contact when its two tooth surfaces are in meshing contact when the rotation direction of the worm gear is at right angles to the rotation direction of the worm gear transmitting power. This kind of high sliding contact requires the height of the contact surface to be consistent. If it is improperly assembled or the parts do not match, it is easy to increase the friction of the contact surface and wear quickly.
02. When the worm gear wpds155 reducer is installed vertically, it is easy to cause insufficient lubricating oil. When the worm gear wpds155 reducer stops running, the transmission gear oil between the motor and the reducer is lost, and the gear can not get due lubrication protection. During startup, the gear is not effectively lubricated, resulting in mechanical wear or even damage.
03. The materials of worm gear and bearing of wpds155 reducer are easy to wear.
04. Maintenance management of worm gear wpds155 reducer. The lubricating oil is improperly selected or needs to be replaced.
Through the above introduction, you should know why the turbine reducer is easy to wear out!